# EasyTimer.app — landing page guide ## 1 Hour Timer App — Free Online Countdown | EasyTimer.app Canonical URL: https://easytimer.app/1-hour-timer Use this free 1 hour timer app when you need an online timer for one hour without installing anything. The page opens with a 60 minute countdown ready to start, and you can switch to fullscreen, change the sound or display style, and save the configured URL for the next deep-work block, meeting, study session, workshop, or cooking checkpoint. ### Use cases - Deep work and focus sessions where a 60 minute countdown gives one meaningful block without a full afternoon commitment - Long meetings and workshops that need a visible hour boundary before review, break, or handoff - Timed study, revision, and exam-practice sessions where an online timer for one hour keeps the practice realistic - Cooking checkpoints for slow roasting, baking, simmering, or resting steps that need a clear one-hour reminder ### How it works 1. **Define the hour before it starts.** Choose one deep-work objective, workshop segment, exam practice set, or cooking checkpoint for the next 60 minutes. Starting with a clear outcome makes the long countdown easier to use. 2. **Reduce mid-session friction.** Set font size, colour, and sound before pressing play. For a full hour, small readability problems become annoying, especially on projectors or second monitors. 3. **Use the finish as a review point.** When the timer ends, check progress, capture notes, or decide whether to take a break before another block. Avoid immediately restarting unless the next hour has a fresh purpose. ### Frequently asked questions **How many Pomodoro sessions fit in 1 hour?** Two full Pomodoro sessions (25 min focus + 5 min break each) fit in one hour, with a few minutes to spare. **Is this a free 1 hour timer app?** Yes. This page works as a free 1 hour timer app in your browser. It opens with a 60 minute countdown, requires no signup, and can be used fullscreen or saved as a shareable URL. **What is a deep-work block?** Cal Newport defines a deep-work block as 60–90 minutes of distraction-free focused work on a cognitively demanding task. 1 hour is the practical minimum to enter and sustain a flow state. **Is 1 hour a standard exam length?** Many high-school and college exams use 50–60 minute slots; AP-exam sections are typically 45–60 minutes. The 1-hour timer is a common reference for timed practice exams. ## 1 Minute Timer — Free 1min Online Countdown | EasyTimer.app Canonical URL: https://easytimer.app/1-minute-timer This free 1 minute timer starts a 60 second online countdown instantly. It is also a 1min timer — the same one-minute duration, ready for speeches, pitch practice, HIIT intervals, classroom drills, quick games, and short kitchen tasks. Use it for elevator pitches, lightning rounds, HIIT intervals, and any task where short, sharp focus matters. Sixty seconds is the length sales and pitch coaches most often cite for an "elevator pitch" — the time it takes to ride an elevator a few floors — so a one-minute clock is the standard tool for rehearsing one until it lands cleanly. It is also a common work or rest interval in HIIT (high-intensity interval training): a 60-second hard effort followed by a 60-second recovery is one of the simplest interval structures to follow. The same fixed minute works for speech-practice runs, quick kitchen tasks, and fast classroom drills. Start instantly, no signup. ### Use cases - Elevator pitches and 1-minute speeches — rehearse until the message fits inside 60 seconds, the length pitch coaches cite because it matches a short elevator ride; aim to land the ask with a few seconds to spare so a real one never runs long - HIIT intervals — a 60-second work or recovery block, one of the simplest interval structures; pair two one-minute timers, one for the hard effort and one for the rest, to run a full session - Lightning round games and quizzes — a fixed per-turn limit that keeps every player on the same clock - Quick microwave, kettle, and reheat tasks - Classroom speed activities — think-pair-share prompts, tidy-up sprints, and one-minute writing bursts ### How it works 1. **Set the one-minute boundary.** Use this page when the time limit matters more than setup: pitches, lightning answers, classroom drills, planks, microwave checks, or fast reset moments between longer tasks. 2. **Keep the display simple.** For short timers, large digits and a clear end sound matter most. Avoid decorative backgrounds if people need to read the final seconds quickly from a distance. 3. **Repeat rounds cleanly.** After the countdown ends, restart it for the next speaker, exercise, or game turn. The fixed 1 minute duration keeps each round consistent, which is the whole point when you are timing several people in sequence — nobody gets a longer turn because someone fumbled the reset. ### Frequently asked questions **What can I do in 1 minute?** A 1 minute timer is the elevator-pitch standard for sales and product demos, a common work/rest interval in HIIT and core-hold workouts, the lightning-round limit in debate formats, and a common pacing tool for public-speaking practice. **Is there a 60 second version?** 1 minute and 60 seconds are the same duration. This timer counts down from 1:00 to 0:00. **Is this a free 1 minute timer app?** Yes. This is a free 1 minute timer app in your browser: no signup, no install, and the 60 second countdown is ready when the page loads. **Is 1 minute long enough for a break?** For a true cognitive rest, no — research suggests 5+ minutes is needed to restore focused attention. A 1 minute pause is enough for a stretch, a water sip, or a quick breathing exercise between deeper work blocks. ## 10 Minute Timer Online — Free Countdown | EasyTimer.app Canonical URL: https://easytimer.app/10-minute-timer This free 10 minute timer online opens with a 10:00 countdown ready to start. Use it when you need an online timer for 10 minutes: stand-ups, study breaks, pasta or rice checks, yoga flows, classroom activities, Q&A slots, or a fullscreen countdown for a group. Ten minutes is a conventional length for a focused team stand-up: agile guidance caps the daily stand-up at 15 minutes, and many teams treat 10 minutes as the working target to keep updates tight and force the longer discussions into a follow-up. The same block suits skill-drill intervals in sport and music practice, where short, repeated reps with a hard stop build more than one long unfocused session. Ten minutes is also enough for a compact yoga flow or sun-salutation sequence, a quick study break between deeper work, a lab timing step, and cooking tasks like pasta and rice. A visible countdown turns the ten minutes into a real boundary rather than a rough guess. ### Use cases - Stand-ups and short meetings — a tight target under the 15-minute agile cap; project the countdown so updates stay to yesterday, today, and blockers instead of drifting into problem-solving - Skill-drill intervals for sport and music practice — ten focused minutes on one weakness (scales, free throws, a single passage) beats an unstructured longer session - Study breaks and focus intervals, including a short between-subjects reset - Yoga flows and sun-salutation sequences — enough for a compact daily practice or a morning wake-up routine - Cooking — pasta, rice, soft vegetables, and other quick dishes timed to the minute so they do not overcook ### How it works 1. **Start the 10 minute window.** Use the ready-made countdown for a stand-up, pasta check, quick yoga flow, or study break. Press play or use the keyboard when you want the ten-minute block to begin. 2. **Match the room or task.** For a meeting room, choose a high-contrast colour and larger digits. For cooking or solo work, keep the page open on a phone or tablet where the remaining time is easy to glance at. 3. **Save the repeat setup.** If the timer belongs to a daily stand-up, recurring class activity, or regular break, copy the configured URL after you set the look and sound preferences. Bookmark it or drop it into the meeting invite so the same ten-minute timer opens ready to start, with no setup, every time the group meets. ### Frequently asked questions **What is a 10 minute timer commonly used for?** Ten minute timers are popular for short meetings, study breaks, cooking tasks, quick workouts, classroom activities, and timed Q&A sessions after presentations. **Can I use this as a 10 minute timer app?** Yes. The timer runs in your browser like a simple 10 minute timer app: open the page, press start, and use the same URL again whenever you need a 10:00 countdown. **How do I set a 10 minute timer?** The timer starts at 10 minutes automatically when you open this page. Press the play button or hit the spacebar to begin the countdown. **Can I customise the appearance?** Yes. Change font, colour, size, background, and display position. Every setting is saved in the URL so you can bookmark your exact configuration. **Does it work on mobile?** Yes. EasyTimer.app is fully responsive and works on phones, tablets, and desktops. **Is 10 minutes a good yoga session length?** Yes — a focused 10-minute yoga flow can be enough for a daily practice. Sun-salutation sequences and sunrise routines are commonly built around 10 minutes. **Are scrum stand-ups always 10–15 minutes?** The standard agile guideline is "no more than 15 minutes." Many teams target 10 minutes as the soft limit to keep things tight. ## 15 Minute Timer Online — Free Countdown | EasyTimer.app Canonical URL: https://easytimer.app/15-minute-timer This free 15 minute timer online starts a quarter-hour countdown instantly. Use it as an online timer for 15 minutes when you need a Daily Scrum timebox, Pomodoro long break, meditation sit, classroom activity, quick meeting segment, or cooking checkpoint. Fifteen minutes is the canonical agile timebox: the Scrum Guide caps the Daily Scrum at 15 minutes for the Developers, which is why a visible quarter-hour clock is the standard way to keep a stand-up from sprawling. Beyond Scrum, the same timebox is a reliable unit of work — long enough to make real progress on a meeting segment, a focused tidy-up, an inbox sweep, or a single agenda item, but short enough that you stay deliberate about how the time is spent. Fifteen minutes also sits in the most-cited range for a daily meditation sit. The point of a fixed quarter-hour is that the ending is decided in advance, so the block does not quietly drift into half an hour. ### Use cases - Daily Scrum / stand-up — the Scrum Guide caps it at 15 minutes; when the timer runs out, anything unresolved becomes a follow-up rather than stretching the whole team - Pomodoro long breaks taken after four focus sessions, on the shorter end of the standard 15-to-30-minute range - Focused tidy-ups and single agenda items — one clear task with a hard stop so it does not expand to fill the afternoon - A daily meditation sit, sitting inside the most-cited 10-to-20-minute effective range - Classroom group activities and timed exam-practice questions ### How it works 1. **Start a contained 15 minute block.** Use the timer for a long Pomodoro break, meditation session, brief stand-up, classroom group task, or exercise circuit that needs a clear quarter-hour limit. 2. **Decide whether it is rest or work.** For breaks, choose a calmer background and keep notifications away. For meetings or classes, use stronger contrast so the room can see the remaining time. 3. **Close the block deliberately.** When the countdown ends, switch back to the next focus session, meeting item, or class activity. The fixed endpoint prevents a short block from quietly becoming a half hour. For a stand-up, that final chime is the cue to park any deep discussion into a smaller follow-up so the rest of the team can get back to work on time. ### Frequently asked questions **Is 15 minutes a standard Pomodoro break?** The standard Pomodoro long break is 15–30 minutes, taken after every 4 focus sessions. A 15 minute break is on the shorter end and works well for brief recharging before the next round. **Is this a 15 minute timer app?** Yes. This page works as a browser-based 15 minute timer app. It opens at 15:00, works fullscreen, and can be bookmarked or shared for repeated quarter-hour blocks. **Is 15 minutes enough for meditation?** Research suggests 10–20 minutes of daily meditation is the most-cited "minimum effective dose" for stress reduction and attention training. 15 minutes is a popular middle ground for daily practice. **Why is the scrum stand-up capped at 15 minutes?** The Scrum Guide specifies a 15-minute time-box to keep daily stand-ups focused on the three core questions (yesterday / today / blockers). Longer stand-ups indicate the meeting needs to be restructured. ## 2 Minute Timer — Free Online Countdown | EasyTimer.app Canonical URL: https://easytimer.app/2-minute-timer This 2 minute timer opens with a preset 2:00 countdown for quick classroom tasks, transitions, and short breaks. Perfect for tooth-brushing (ADA-recommended duration), short ad spots, quick warmups, and any drill that needs a precise 2-minute window. ### Use cases - Teeth brushing (dentist recommended 2 minutes) - Quick speeches and presentations - Cooking and microwave tasks - Short game rounds ### How it works 1. **Run a precise 2 minute drill.** Start the countdown for tooth brushing, rebuttal practice, a short ad break, or a quick classroom challenge. The page opens at exactly two minutes. 2. **Use visible checkpoints.** For brushing, mentally split the timer into four 30-second quadrants. For speeches or games, use the halfway mark to judge whether the pace is on track. 3. **Reset for the next person.** When a round finishes, restart the same timer instead of changing settings. That keeps each participant on the same two-minute limit. ### Frequently asked questions **Why is 2 minutes the recommended tooth-brushing time?** The American Dental Association recommends 2 minutes of brushing — 30 seconds per quadrant — to ensure plaque is removed without over-abrasion. Many electric toothbrushes use this 2-minute target as a built-in default. **What other 2-minute drills are common?** TV ad blocks are typically 2 minutes; debate "rebuttal" rounds are often 2 minutes; HIIT high-intensity intervals frequently use 2-minute work blocks. **Is 2 minutes a good plank or core-hold target?** A 2-minute plank is the standard fitness benchmark for "good core endurance" per ACSM guidelines. Beginners typically start at 20-30 seconds and work up; 2 minutes is a meaningful milestone, not a starting point. ## 20 Minute Timer — Free Online Countdown | EasyTimer.app Canonical URL: https://easytimer.app/20-minute-timer This 20 minute timer opens with a preset 20:00 countdown for focused work, classroom activities, and short meetings. Common uses: focused study sessions (the Cornell-method block size), HIIT workouts, oven preheating, and short college lectures. ### Use cases - Power naps (20 minutes is optimal) - Workshop and classroom activities - Cooking tasks - Short focused work sessions ### How it works 1. **Frame the 20 minute activity.** Use this page for a power nap, focused reading block, workshop exercise, oven preheat, or HIIT session where twenty minutes is enough time to complete one contained activity. 2. **Set the display for the environment.** For naps, dim the screen and rely on the end sound. For workshops or workouts, use fullscreen with a clear colour so everyone can pace themselves without asking for updates. 3. **Move on when it ends.** A 20 minute timer is most useful when the next step is decided in advance: review notes, rotate groups, cool down, or return to work before momentum fades. ### Frequently asked questions **Why is 20 minutes ideal for a power nap?** Sleep researchers recommend 20 minutes as the optimal nap duration — long enough to feel rested but short enough to avoid entering deep sleep (which causes grogginess on waking). **Why is 20 minutes a popular study block?** The Cornell note-taking method recommends 20-minute focused study blocks followed by 5-minute review. It is shorter than a Pomodoro (25 minutes) and works well for high-density technical reading. **Is 20 minutes a complete HIIT workout?** Yes — a classic HIIT (high-intensity interval training) session is 20–30 minutes including warm-up. Tabata-style protocols can be as short as 4 minutes, but full HIIT sessions typically target the 20-minute mark. ## 25 Minute Timer — Pomodoro Focus Session | EasyTimer.app Canonical URL: https://easytimer.app/25-minute-timer A free 25 minute countdown timer — the standard length of a Pomodoro focus session. Also used for college-lecture segments, exam-prep blocks, and creative-writing sprints. ### Use cases - Pomodoro focus sessions (25-minute work intervals) - Deep work blocks with a defined endpoint - Study sessions for students - Timed writing or creative sprints - Stream focus sessions on Twitch or YouTube ### How it works 1. **Protect one focus sprint.** Before starting, choose the task you will finish or move forward in the next 25 minutes. Start the countdown and treat the visible timer as the boundary for that single work interval. 2. **Prepare the break handoff.** Keep a 5 minute timer or the Pomodoro route nearby if you want automatic focus-and-break rhythm. This page works best when you want one manual Pomodoro-length block. 3. **Use it on screen or stream.** Fullscreen mode suits study rooms and coworking sessions. For live streams, set transparent background and custom colours before adding the URL as a browser source. ### Frequently asked questions **Why is 25 minutes the Pomodoro focus length?** The Pomodoro Technique, developed by Francesco Cirillo, uses 25-minute focused work sessions followed by 5-minute breaks. Research shows this interval optimises concentration and reduces mental fatigue. **Why 25 minutes for a Pomodoro?** Francesco Cirillo chose 25 minutes in the late 1980s based on his own focus-and-fatigue experiments using a tomato-shaped kitchen timer (hence "pomodoro" — Italian for tomato). Research has since shown the 20–30 minute range is the sweet spot for sustained attention before mental fatigue starts to compound. **Can I stream this timer on Twitch or YouTube?** Yes. Enable transparent background in settings and paste the URL as an OBS browser source to add it as a stream overlay. Custom colours make it fit any stream aesthetic. ## 3 Minute Timer — Free Online Countdown | EasyTimer.app Canonical URL: https://easytimer.app/3-minute-timer This 3 minute timer opens with a preset 3:00 countdown for short activities, transitions, and timed breaks. Used for tea steeping (the optimal duration for most black teas), short-essay outlining, public-speaking warmups, and quick mental-math drills. ### Use cases - 3-minute speeches and presentations - Soft-boiled egg timer - Quick game rounds - Presentation Q&A slots ### How it works 1. **Choose the three-minute task.** Use this timer for black tea, a soft-boiled egg, a compact speech, a Q&A slot, or a short exam-planning sprint where three minutes is the useful constraint. 2. **Make timing visible early.** Open fullscreen before the speaker, class, or kitchen task begins. Three minutes passes quickly, so the timer should already be readable when you press start. 3. **Keep the end cue active.** Leave sound enabled for cooking and solo drills. In quiet rooms, use the visual finish instead and restart the same page for the next practice round. ### Frequently asked questions **How long does it take to soft-boil an egg?** A soft-boiled egg with a runny yolk typically takes 3 minutes in boiling water. A 3-minute timer is perfect for this. **Is 3 minutes the right time to steep tea?** For most black teas (English Breakfast, Earl Grey, Assam), 3 minutes is the standard steep time at 95–100°C. Green teas typically use shorter durations (1–2 minutes) at lower temperatures. **Can I use it as an essay outlining timer?** Yes — the "rapid outlining" technique writes a 3-minute essay structure: thesis, three supporting points, conclusion. Useful for timed exam prep. ## 30 Minute Timer Online — Free Countdown | EasyTimer.app Canonical URL: https://easytimer.app/30-minute-timer Need an online timer for 30 minutes? This page opens with a 30:00 countdown ready to start. Use it for half-hour meetings, study blocks, workouts, classroom activities, cooking checkpoints, podcast edits, or any task that needs a visible 30 minute timer online. Half an hour is the unit most calendars are built around — the default event length when you click to create a meeting in Google Calendar or Outlook — which is why so much of the working day is sliced into 30-minute blocks. Running a visible countdown on that block changes how it is spent: people give shorter updates and defer tangents when they can see the half-hour boundary approaching. The same duration frames a broadcast half-hour, a contained workout, and a baking or roasting checkpoint where you want to look at the dish before it overcooks. The timer gives the slot a clear ending instead of letting it depend on whoever happens to glance at the clock. ### Use cases - 30-minute meetings and stand-ups — a visible clock nudges the group to keep updates short and reserve the last five minutes to confirm decisions, assign owners, and agree next steps before the slot ends - Study sessions and revision blocks — one topic or past-paper section at a time, with a clear stopping point before fatigue sets in - Workout and exercise blocks, from a circuit to a steady cardio session - Cooking — roasting and baking checkpoints, set to the point where you want to turn the tray, baste, or check colour rather than the final cook time - Podcast or video editing passes — a fixed half-hour to draft one segment before reviewing it ### How it works 1. **Use it for one half-hour commitment.** Start the countdown for a meeting segment, revision block, workout, podcast edit, or baking checkpoint. The timer gives the slot a visible ending instead of relying on the calendar. 2. **Keep participants aligned.** In a meeting or class, put the timer on a shared screen before discussion starts. Seeing the half-hour boundary helps people choose shorter updates and defer tangents. 3. **Bookmark recurring setups.** If you use the same 30 minute timer for office hours, lessons, or training sessions, save the configured URL after choosing font, colour, sound, and background. Once a meeting needs several timed items rather than one flat half-hour — a few agenda points each with their own limit — switch to the Meeting feature, which runs the segments back to back for you. ### Frequently asked questions **How long is a standard meeting?** The most common meeting length is 30 or 60 minutes. Research shows 25-30 minute meetings tend to be more productive than hour-long ones due to shorter attention spans. **How long is a TV episode usually?** A standard 30-minute TV slot is typically 22 minutes of content + 8 minutes of advertising. Streaming-original 30-minute episodes are often 24–28 minutes of pure content. **Can I use this as a meeting timer?** Yes. 30-minute meeting blocks are the calendar default for most professional scheduling tools. For agenda-driven meetings with multiple timed items, see the EasyTimer.app Meeting feature. **Can I set up a timer for 30 minutes?** Yes. This page is already set up as a 30 minute timer. Open it, press start, and use fullscreen or a saved URL if you want to reuse the same half-hour countdown. ## 45 Minute Timer — Free Online Countdown | EasyTimer.app Canonical URL: https://easytimer.app/45-minute-timer This 45 minute timer opens with a preset 45:00 countdown for lessons, study blocks, and longer work sessions. Common uses: a class period, a gym session, a half of football, and the standard ultradian rest cycle. ### Use cases - School and university class periods - Study and revision sessions - Focused work blocks - Workout sessions ### How it works 1. **Open a class-length timer.** Use the 45 minute countdown for a school period, tutoring session, lecture segment, study hall, or focused work block that follows a traditional classroom rhythm. 2. **Show it where attention already is.** Put the timer on the projector, whiteboard display, or second monitor before the lesson begins. A visible countdown reduces verbal time checks during the period. 3. **Reserve time for wrap-up.** Treat the final five minutes as a signal to collect work, assign next steps, or close discussion. The countdown helps keep the end of class from arriving abruptly. ### Frequently asked questions **Why is 45 minutes a common class length?** 45 minutes is a standard school period length because it balances enough time for meaningful learning while staying within typical student attention spans. **How long is a typical school class period?** Standard middle-school and high-school class periods are 45–55 minutes in most US and UK systems. The 45-minute period is also the standard university lecture length. **What is the 45-minute "ultradian" cycle?** Research on attention and rest cycles suggests the human brain operates on roughly 90-minute ultradian cycles, with a 45-minute peak-focus window in the first half. A 45-minute work block aligns with this peak. ## 5 Minute Timer Online — Free Countdown | EasyTimer.app Canonical URL: https://easytimer.app/5-minute-timer Need an online timer for 5 minutes? This page opens with a 5:00 countdown ready to start. Use it as a free 5 minute timer online for Pomodoro short breaks, classroom transitions, lightning Q&A, workout rests, cooking checks, or a fullscreen countdown on a shared screen. It is also the standard duration for a Pomodoro short break. In the Pomodoro Technique, every 25-minute focus session is followed by a fixed 5-minute break, and that short rest is what keeps the cycle sustainable across a long working day; setting a visible five-minute clock stops the break quietly stretching into ten or fifteen. The same five-minute block is a common rest interval between HIIT workout sets, a clean window for a classroom transition between activities, the time it takes to steep a robust black tea, and a practical limit for the Q&A after a lightning talk. For automatic focus/break cycling rather than a single manual break, see the Pomodoro Timer. ### Use cases - Pomodoro short breaks — the standard 5-minute rest between 25-minute focus sessions; stand up, look away from the screen, and avoid starting anything that will run past the chime - HIIT rest intervals between workout sets — long enough to bring your heart rate down before the next round without going cold - Classroom transitions and timed activities — pack-away, line-up, or swap-stations windows where a visible countdown stops the changeover eating the next lesson - Presentation Q&A and lightning-talk question slots, with the timer faced toward the room so questioners self-regulate - Steeping a robust black tea such as English Breakfast or Assam — close to the upper end of the recommended steep before it turns bitter - Cooking and kitchen timers for short tasks — resting a steak, proving-stage checks, or a quick simmer ### How it works 1. **Use it as a short break clock.** Open the page when a focus session, lesson segment, or workout interval ends. The display is already set to five minutes, so you can start the rest period without typing a duration. 2. **Tune the break display.** Adjust the sound, colour, font, and background if the timer will sit on a projector, kitchen tablet, or stream scene. The configured URL can be bookmarked for the next break. 3. **Make the finish obvious.** Keep the end chime on for solo work, or switch to a large fullscreen view for classrooms and presentations where people need to see the final seconds from across the room. If you run back-to-back five-minute breaks through a long study session, leave the page open and restart it each cycle rather than retyping the duration — the configuration and sound choice persist between runs. ### Frequently asked questions **What is a 5 minute timer used for?** Five minute timers are commonly used for Pomodoro technique short breaks, quick cooking tasks, presentation countdowns, classroom transitions, HIIT workout rest periods, and quick shared-screen timeboxes. **Is this a free 5 minute timer app?** Yes. This page works as a free 5 minute timer app in your browser. It starts at 5:00, needs no signup, and can be used fullscreen or saved as a shareable URL. **How does this fit with the Pomodoro Technique?** The standard Pomodoro short break is exactly 5 minutes — the rest interval between 25-minute focus sessions. After 4 focus sessions you take a longer 15–30 minute break. Use this timer as a manual short-break, or use the Pomodoro Timer for fully automatic phase advancement. **Does this timer work as an OBS overlay?** Yes. EasyTimer.app works as an OBS browser source overlay. Enable transparent background in settings and paste the URL into your OBS browser source. Supports Twitch, YouTube, and Kick. **Can I fullscreen this timer for presentations?** Yes. Press F or click the fullscreen icon to expand the timer to fill your entire screen. Great for projectors and smartboards. **Will this timer play a sound when it ends?** Yes, an end chime plays by default. You can disable it in the settings panel. ## 90 Minute Timer — Free Online Countdown | EasyTimer.app Canonical URL: https://easytimer.app/90-minute-timer This 90 minute timer opens with a preset 90:00 countdown for deep work, long classes, and extended sessions. Used for the standard feature film, a football match, the complete ultradian focus cycle, and university double-lectures. ### Use cases - Deep work sessions (ultradian rhythm) - Long workshops and seminars - Extended study and revision - Film and lecture timing ### How it works 1. **Plan a full 90 minute cycle.** Use this timer for deep work, a university double lecture, a workshop block, film timing, or extended study where a single uninterrupted session is the goal. 2. **Prepare for a longer visible run.** Choose a comfortable display style before starting. For ninety minutes, fullscreen mode and a calm colour palette make the countdown useful without becoming distracting. 3. **Pair it with a real break.** After a 90 minute block, schedule recovery rather than stacking another long session immediately. The timer works best as one complete cycle followed by rest or review. ### Frequently asked questions **Why do some people work in 90-minute blocks?** Research by Peretz Lavie and others shows the brain naturally cycles through 90-minute ultradian rhythms of high and low alertness. Working in 90-minute focused blocks and then resting aligns with this natural rhythm. **Why is 90 minutes the "ultradian" cycle?** Research on biological rhythms (Nathan Kleitman, 1953) identified roughly 90-minute cycles of alertness and rest in the human brain. The 90-minute work block matches the natural attention envelope; the BRAC (Basic Rest-Activity Cycle) is the underlying model. **Is 90 minutes the standard feature-film length?** Yes — 90 minutes is the post-1970s industry standard for theatrical features. Films routinely run 100–120 minutes, but distribution and pacing are still calibrated around the 90-minute reference. ## Airplane Timer — Animated Countdown | EasyTimer.app Canonical URL: https://easytimer.app/animated/airplane This airplane timer pairs a countdown with an illustrated plane over ocean waves for people timing activities or short waits. The loop is smooth and breezy. The illustration uses a fixed hand-drawn palette, so it looks its best on the page's own dark background. ### Use cases - A travel-themed waiting screen for classrooms and trips - Focus or study breaks with a sense of motion - Countdowns for boarding, departures, and travel days - A relaxed countdown for streams and video calls - Adding a little wanderlust to any short wait ### How it works 1. **Choose a countdown length.** Set a duration for a classroom activity, travel-preparation task, or short break. The illustrated plane and ocean scene appear above the running countdown. 2. **Show the countdown.** Start the timer and place the page on a shared display when a group needs to see the remaining time. Use fullscreen for a larger view; the scene artwork uses a fixed palette. ### Frequently asked questions **Can I change the colors of the scene?** No — the illustration uses a fixed hand-drawn palette so it always looks consistent. You can still change the timer digit color in settings to keep the numbers readable against the scene. **Does the animation distract from the timer?** It loops smoothly above the digits, so the countdown stays the clear focal point. **Does it respect reduced-motion settings?** If your device requests reduced motion, EasyTimer.app pauses the animation and shows a still frame, so the plane no longer moves. **Why is this on its own page instead of in the background settings?** The animation uses a separate animation library (Lottie) that we keep off the homepage for fast load times. Its own route means visitors who do not want it never download it. ## Black Cat Timer — Animated Countdown | EasyTimer.app Canonical URL: https://easytimer.app/animated/black-cat This black cat timer pairs a countdown with a calmly animated cat for people timing quiet work, reading, or short waits. The loop is understated and calm. The illustration uses a fixed hand-drawn palette, so it looks its best on the page's own dark background. ### Use cases - A calm waiting screen for classrooms and video calls - Quiet focus or study sessions - Cozy evening reading or wind-down timers - A minimalist countdown for streams - Any moment that wants a touch of feline calm ### How it works 1. **Choose a countdown length.** Set a duration for a quiet work block, reading break, or short wait. The black-cat illustration stays above the digits while its tail animation loops. 2. **Start the timer.** Press Start when the timed activity begins. Use fullscreen if the timer should be visible from a distance; change the digit colour in settings if you need more contrast. ### Frequently asked questions **Can I change the colors of the cat?** No — the illustration uses a fixed hand-drawn palette so it always looks consistent. You can still change the timer digit color in settings to keep the numbers readable against the scene. **Does the animation distract from the timer?** It is intentionally subtle — only the tail moves — so the countdown stays the clear focal point. **Does it respect reduced-motion settings?** If your device requests reduced motion, EasyTimer.app pauses the animation and shows a still frame, so the cat no longer moves. **Why is this on its own page instead of in the background settings?** The animation uses a separate animation library (Lottie) that we keep off the homepage for fast load times. Its own route means visitors who do not want it never download it. ## Flight Path Timer — Animated Countdown | EasyTimer.app Canonical URL: https://easytimer.app/animated/flight-path This flight path timer pairs a countdown with a simple animated plane route for people timing focus blocks, rehearsals, or activities. The loop is clean and simple — a single line of motion. The figure is rendered light-on-dark to read clearly against the page's own dark background. ### Use cases - A clean, low-distraction waiting screen for meetings and classrooms - Minimalist focus or study sessions - Travel-day and itinerary countdowns - A tidy countdown overlay for streams - Anywhere a simple, uncluttered animation fits best ### How it works 1. **Choose a countdown length.** Set a duration for a focus block, rehearsal, or other timed activity. The plane traces a dotted path above the countdown display. 2. **Run the countdown.** Start the timer when the activity begins and use fullscreen if the display will be shared. Timer digits can be adjusted in settings while the flight-path artwork remains fixed. ### Frequently asked questions **Can I change the color of the plane?** No — the figure is a fixed monochrome illustration, rendered light-on-dark so it reads against the page background. You can still change the timer digit color in settings. **Does the animation distract from the timer?** It is a single minimalist line of motion above the digits, so the countdown stays the clear focal point. **Does it respect reduced-motion settings?** If your device requests reduced motion, EasyTimer.app pauses the animation and shows a still frame, so the plane no longer moves. **Why is this on its own page instead of in the background settings?** The animation uses a separate animation library (Lottie) that we keep off the homepage for fast load times. Its own route means visitors who do not want it never download it. ## Happy Cat Timer — Animated Countdown | EasyTimer.app Canonical URL: https://easytimer.app/animated/happy-cat This happy cat timer pairs a countdown with an animated lounging cat for people timing a lighthearted activity, break, or wait. The animation loops gently to keep the mood light. The illustration uses a fixed hand-drawn palette, so it looks its best on the page's own dark background. ### Use cases - A friendly waiting screen for classrooms and kids' activities - Lighthearted focus or study breaks - Cozy reading, chores, or cooking timers - A warm countdown for streams and video calls - Brightening up any short wait ### How it works 1. **Choose a countdown length.** Set a duration for a short break, activity, or waiting period. The lounging cat and floating hearts remain above the timer digits as the countdown runs. 2. **Start the timer.** Press Start and place the page on the screen people are using. Use fullscreen when the timer should be visible across a room; the illustration palette itself is fixed. ### Frequently asked questions **Can I change the colors of the cat?** No — the illustration uses a fixed hand-drawn palette so it always looks consistent. You can still change the timer digit color in settings to keep the numbers readable against the scene. **Does the animation distract from the timer?** It is intentionally slow and sits above the digits, so the countdown stays the clear focal point. **Does it respect reduced-motion settings?** If your device requests reduced motion, EasyTimer.app pauses the animation and shows a still frame, so the cat no longer moves. **Why is this on its own page instead of in the background settings?** The animation uses a separate animation library (Lottie) that we keep off the homepage for fast load times. Its own route means visitors who do not want it never download it. ## Paper Plane Timer — Animated Countdown | EasyTimer.app Canonical URL: https://easytimer.app/animated/paper-plane This paper plane timer pairs a countdown with an illustrated plane and cloud scene for people timing study blocks, activities, or waits. The loop is light and airy. The illustration uses a fixed hand-drawn palette, so it looks its best on the page's own dark background. ### Use cases - A light waiting screen for classrooms and video calls - Calm focus or study breaks - Send-off, deadline, and "wrap it up" timers - A minimalist countdown for streams - Keeping short waits gently in motion ### How it works 1. **Choose a countdown length.** Set a duration for a study block, classroom activity, or short wait. The paper plane moves through the illustrated cloud scene above the timer digits. 2. **Start the activity.** Press Start when the timed period begins. Use fullscreen when others need to read the countdown from across the room; the illustration itself uses a fixed palette. ### Frequently asked questions **Can I change the colors of the scene?** No — the illustration uses a fixed hand-drawn palette so it always looks consistent. You can still change the timer digit color in settings to keep the numbers readable against the scene. **Does the animation distract from the timer?** It drifts slowly above the digits, so the countdown stays the clear focal point. **Does it respect reduced-motion settings?** If your device requests reduced motion, EasyTimer.app pauses the animation and shows a still frame, so the plane no longer moves. **Why is this on its own page instead of in the background settings?** The animation uses a separate animation library (Lottie) that we keep off the homepage for fast load times. Its own route means visitors who do not want it never download it. ## Playful Cat Timer — Animated Countdown | EasyTimer.app Canonical URL: https://easytimer.app/animated/playful-cat This playful cat timer pairs a countdown with an animated cat batting a ball for people timing games, activities, or breaks. The loop is bouncy and light without pulling attention from the numbers. The illustration uses a fixed hand-drawn palette, so it looks its best on the page's own dark background. ### Use cases - A playful waiting screen for classrooms and kids' activities - Energetic focus or study breaks - Game-night and activity timers - A fun countdown for streams and video calls - Keeping short waits cheerful ### How it works 1. **Choose a countdown length.** Set a duration for a game, classroom activity, or short break. The animated cat and ball sit beside the countdown so the remaining time stays easy to see. 2. **Run the activity.** Start the timer when the activity begins and show the page on a shared screen if others need to follow along. Use fullscreen for a larger view; the illustration palette is fixed. ### Frequently asked questions **Can I change the colors of the cat?** No — the illustration uses a fixed hand-drawn palette so it always looks consistent. You can still change the timer digit color in settings to keep the numbers readable against the scene. **Does the animation distract from the timer?** It sits above the digits and loops gently, so the countdown stays the clear focal point. **Does it respect reduced-motion settings?** If your device requests reduced motion, EasyTimer.app pauses the animation and shows a still frame, so the cat no longer moves. **Why is this on its own page instead of in the background settings?** The animation uses a separate animation library (Lottie) that we keep off the homepage for fast load times. Its own route means visitors who do not want it never download it. ## Relax Timer — Animated Background | EasyTimer.app Canonical URL: https://easytimer.app/animated/relax This animated relaxation timer pairs a countdown with an illustrated meditation scene for people timing breathwork, meditation, or wind-down sessions. The animation loops gently to set a relaxed, unhurried tone for breathwork, meditation, and wind-down sessions. The figure uses a fixed hand-illustrated palette, so it looks its best on the page's own neutral background. ### Use cases - Meditation and breathwork sessions - Yoga and stretching wind-downs - Calm focus or study breaks - A soothing waiting screen for classrooms or video calls - Bedtime and relaxation routines ### How it works 1. **Choose a duration.** Set the countdown for a meditation, breathwork, or wind-down session. The illustrated scene stays above the timer digits while the countdown runs. 2. **Start a calm session.** Start the timer and place the page where it is easy to glance at without interrupting the activity. The illustration has a fixed palette; timer digit colour can be adjusted in settings. ### Frequently asked questions **Can I change the colors of the meditation figure?** No — the illustration uses a fixed hand-drawn palette so it always looks consistent. You can still change the timer digit color in settings to keep the numbers readable against the scene. **Does the animation distract from the timer?** It is intentionally slow and low-contrast, and it sits above the digits, so the countdown stays the clear focal point. **Does it respect reduced-motion settings?** If your device requests reduced motion, EasyTimer.app pauses the animation and shows a still frame, so the figure no longer moves. **Why is this on its own page instead of in the background settings?** The animation uses a separate animation library (Lottie) that we keep off the homepage for fast load times. Its own route means visitors who do not want it never download it. **Will more animated timers be added?** Yes — the /animated route group is built to host more animated timers over time, each at its own URL so they stay performance-isolated. ## Classroom Timer — Free Fullscreen Teacher Timer | EasyTimer.app Canonical URL: https://easytimer.app/classroom-timer This classroom timer gives teachers and students a visible countdown for lessons, activities, tests, and transitions. The countdown is designed to be readable from the back of the room, whether it is projected on a smartboard, shown on a classroom TV, or opened on a laptop at the front desk. Use the default large display for a simple "time left" signal, or add custom text such as "Clean Up Time", "Reading Sprint", "Group Discussion", or "Exam Starts In" so students know exactly what the countdown is for. Because the page does not require login, advertising, or analytics consent, it is practical for quick use during a live class. ### Use cases - Timed classroom activities and group work — keep stations, pair discussions, worksheet rounds, and independent practice moving without repeated verbal reminders. - Exam and test countdowns — show a visible time remaining signal for short quizzes, bell-ringers, exit tickets, and timed practice papers. - Transition and clean-up timers — make packing up, rotating groups, getting materials, or settling after recess more predictable for the whole room. - Presentation and speech timing for students — give speakers a clear countdown while classmates can also see when a turn is ending. - Smartboard warmups and starters — open the timer before students enter so the first task has a visible endpoint from the start of class. - Quiet work blocks — keep the timer large enough to read while avoiding extra browser clutter, ads, or tracking prompts. ### How it works 1. **Choose the activity window.** Open the classroom timer and set the duration for the lesson activity, transition, test, or presentation. Add a short custom label when students need to know what the countdown is for. 2. **Show the countdown to the room.** Place the page on the classroom display and use fullscreen when you want the countdown to fill the screen. Start the timer when the activity begins so the remaining time is visible to the group. ### Frequently asked questions **Can I project this timer on a smartboard?** Yes. Use fullscreen mode (press F or click the fullscreen button) to fill the entire screen. The large countdown is clearly visible from the back of most classrooms. **Can I add a message like "Clean up time"?** Yes. Open settings and add custom text above or below the timer. Great for showing instructions during timed activities. **Does it work without internet once loaded?** The timer logic runs entirely in the browser with no server calls — once the page loads, the countdown works offline. Keep the tab open if the classroom network drops during an activity. **Is this classroom timer free for teachers?** Yes. EasyTimer.app is free to use, does not require an account, and does not add advertising to the classroom display. Open the page, choose the duration, and start the countdown. **Can students open the same timer on their own devices?** Yes. Settings are stored in the URL, so you can copy a configured timer link and share it through your learning platform, chat, or slide deck. Students who open the link see the same duration, colours, text, and layout without needing accounts or setup. **What timer length works best for classroom transitions?** Short transitions usually work well with 1, 2, 3, or 5 minute timers. Longer activities often use 10, 15, 20, or 45 minutes. The related timers below link to common classroom durations. **Can I use this for student presentations?** Yes. For simple classroom talks, this page works well. For conference-style talks or speaker timing, the presentation timer and meeting timer provide more specialized routes. ## Online Clock — Current Time, Date & Time Zone | EasyTimer.app Canonical URL: https://easytimer.app/clock This online clock shows local time and date for people who need a clear wall-clock display. The display follows your browser's time zone, keeps the digits stable as seconds change, and lets you choose automatic, 12-hour, or 24-hour formatting. Turn seconds on for a precise wall-clock reference, or keep them off for a calmer display on a desk, wall screen, classroom projector, reception display, or second monitor. There is no account, installation, or distracting dashboard — open the page and the clock is ready. ### Use cases - Meetings and presentations — keep the current local time visible on a second screen so speakers, facilitators, and attendees can coordinate without opening a separate clock app. - Classrooms and shared spaces — show a large, readable time display on a projector or smartboard while keeping the rest of the browser interface out of the way. - Travel and remote work — check the browser's local time zone before joining a call, scheduling a handoff, or comparing a deadline with someone in another region. - Reception desks, offices, and events — use the date-and-time view when visitors need both the current time and the full calendar date at a glance. - Precise time checks — enable seconds when coordinating a broadcast cue, race start, experiment, rehearsal, cooking checkpoint, or other event that depends on a visible wall clock. - Fullscreen displays — enter browser fullscreen for a clean clock on a TV, kiosk, wall display, confidence monitor, or always-on workstation. ### How it works 1. **Choose the clock view.** Use Clock Settings or the on-page controls to show the current time, date, or both. Choose automatic, 12-hour, or 24-hour formatting, and turn seconds on when the display needs finer timing. 2. **Prepare the shared display.** Adjust the display for the screen, then use fullscreen for a wall display or projector. The clock follows the browser-reported local time zone, which is shown beside the time. ### Frequently asked questions **Is this online clock free?** Yes. EasyTimer.app's online clock runs in the browser, needs no account, and is free to use. **Which time zone does the clock use?** The clock uses the local time zone reported by your browser and shows that zone beside the display. This makes the reading useful when a laptop has travelled, a meeting spans regions, or you are checking a remote-work handoff. **Can I switch between 12-hour and 24-hour time?** Yes. Open Clock Settings or use the clock controls to choose Automatic, 12-hour, or 24-hour formatting. Automatic follows the browser locale preference; the explicit options keep the format fixed. **Can I show the date as well as the time?** Yes. Choose Date + Time for a combined view, or Date when you only need the current calendar date. The full date is rendered as readable text rather than a numeric string that can be ambiguous across regions. **How do I show seconds?** Press the Seconds control or open Clock Settings and turn on Show seconds. Leave seconds off for a quieter wall display, or enable them when a precise visible reference matters. **Does the clock keep working if I change tabs?** The browser may reduce background-tab updates, but the clock is recalculated from the current wall time rather than counting missed one-second ticks. When you return, it catches up to the correct local time. **Can I use this clock fullscreen on a TV or projector?** Yes. Use the fullscreen control in the glass tray, then keep the display on the screen you want people to see. Kiosk mode is also available when you need the timer chrome and below-fold content hidden from a shared display. **Is this the same as the countdown timer?** No. The main timer counts down from a duration you choose and has Start, Pause, Reset, and add-time controls. The clock shows the current wall time continuously, so it uses clock-specific display controls instead of countdown actions. ## Countdown to a Date — Days, Hours, Minutes, Seconds | EasyTimer.app Canonical URL: https://easytimer.app/countdown-to-date This countdown-to-date timer tracks the time until a chosen date and time for people planning around events, milestones, or deadlines. Pick a target with the date picker — a product launch, exam morning, wedding day, retirement date, race start, visa appointment, or New Year — and the page counts down live in days, hours, minutes, and seconds. Copy the shareable link and anyone who opens it sees the same countdown, with no account and nothing to install. By default the link counts to that wall-clock date and time in each viewer's own time zone (everyone's "midnight on 31 December" is their local midnight); if you need every viewer to target one exact global moment instead, add a UTC offset to the link's to parameter — Z and negative offsets such as -07:00 work as-is, while a plus offset such as +05:30 must be percent-encoded as %2B05:30 in a URL (links copied from this page are encoded for you, and the page also understands the decoded form). When the moment arrives the display flips to counting up, so the page also answers "how long since?" for anniversaries and milestones you have already passed. ### Use cases - Product launches and releases - share one countdown link with your team, community, or waitlist so nobody has to convert time zones by hand. - Exams, applications, and deadlines - keep the days-remaining number visible while you plan revision or submission work backwards from the date. - Weddings, birthdays, and reunions - a countdown you can send to the group chat months ahead and reopen any time. - New Year and holiday countdowns - the wall-clock link means every viewer counts to their own local midnight, which is exactly how New Year works. - Retirement, graduation, and last-day countdowns - long-range targets display full days alongside hours, minutes, and seconds. - Race starts, ticket sales, and event doors - pin the countdown on a second screen or share it in the run-up announcement. ### How it works 1. **Choose the target date and time.** Use the date-and-time picker to select the event, deadline, or milestone. The page displays the remaining days, hours, minutes, and seconds; by default, the selected wall-clock time is interpreted in each viewer’s local time zone. 2. **Share the countdown.** Use Copy shareable link to create a link with the selected target. Open it on a second screen or share it with others; when the target has passed, the display counts up from that moment. ### Frequently asked questions **How do I set a countdown to a specific date?** Use the date-and-time picker at the top of the page and press Start countdown. The display immediately begins counting down the days, hours, minutes, and seconds to your chosen moment. To change the target later, press Change date. **How do I share my countdown?** Press "Copy shareable link". The link encodes your target date in the to parameter (for example ?to=2026-12-31T23:59), so anyone opening it sees the same countdown — no account, install, or setup needed on their side. **Which time zone does the countdown use?** By default the target is a wall-clock time: each viewer counts down to that date and time in their own time zone, which is what you want for New Year and most shared deadlines. If the link's to value ends with a UTC offset, the countdown targets that one exact global moment instead, shown in each viewer's local time. Z and negative offsets such as -07:00 can be typed into a URL directly; a plus offset such as +05:30 must be percent-encoded as %2B05:30 (a raw plus sign decodes to a space, which the page also accepts). The Copy shareable link button handles the encoding for you, and the page tells you which mode the current link uses. **What happens when the date passes?** The display flips from "Time remaining" to "This date has passed — time since" and counts upward from the target moment. That makes the same link useful after the event: it shows how long ago the launch, wedding, or deadline was. **How far in the future can the date be?** Up to 10 years ahead. Dates beyond the 10-year horizon (in either direction) are capped to keep the countdown meaningful, and the page tells you when a link was capped. Invalid dates in a link are ignored and the picker opens instead. **Does the countdown keep running if I switch tabs or lose connection?** Yes. The target is anchored to the clock, not to a ticking counter — after the page loads it needs no server connection, and when you return to a backgrounded tab the display recomputes from the current time, so it is never behind. **How is this different from the normal timer?** The main EasyTimer countdown runs for a duration you start yourself — 10 minutes from now, whenever "now" is. This page counts to a fixed calendar moment: everyone who opens the link is counting to the same date, whether they open it today or next month. **Can I show the countdown on a stream, projector, or big screen?** Yes. The page is a normal web page with a high-contrast display, so you can open it fullscreen on a projector or second screen, or capture the browser window in OBS or another streaming tool for launch and premiere countdowns. ## Fullscreen Timer — Free Full Screen Countdown | EasyTimer.app Canonical URL: https://easytimer.app/fullscreen-timer This fullscreen timer displays a large countdown for groups using a projector, TV, classroom board, or shared screen. Press F or tap the fullscreen button and the timer expands to fill the available display. Use it when the important thing is visibility: everyone in the room, on the call, or watching the stream should be able to read the countdown quickly without menus, ads, or unrelated page furniture competing for attention. It is the general-purpose large-display route when you know the timer needs to be seen from a distance. ### Use cases - Classroom smartboard displays — run bell work, activity stations, clean-up time, and test sections with a timer students can read at a distance. - Conference and event countdowns — show remaining time before a keynote, workshop, panel, break, or session changeover. - Gym and workout timers on large screens — display circuits, rests, warmups, cooldowns, and timed challenges where participants need a shared countdown. - Stream overlays in OBS — use fullscreen sizing during setup, then switch to transparent background or a browser source layout for the live scene. - Meeting-room screens — keep breaks, ideation rounds, retrospectives, and facilitation exercises on schedule without needing a separate app. - Kitchen, rehearsal, and studio spaces — put the timer on whichever device is easiest to see from across the room. ### How it works 1. **Set the countdown.** Choose the duration and any custom text before the group starts. Adjust the digits and colours so the remaining time is easy to read on the intended screen. 2. **Expand the display.** Press F or use the fullscreen control to fill the available display. Share the screen or place the browser on a projector, TV, or room display so participants can follow the countdown. ### Frequently asked questions **How do I make the timer fullscreen?** Press F on your keyboard or click the fullscreen icon in the controls. The timer fills your entire screen. Press Escape or F again to exit. On iPhone (where Safari, Chrome and every browser share the same engine) tapping the fullscreen button hides the app bars; for a fully chrome-free timer, open the page in Safari and add EasyTimer to your Home Screen from the Share menu. **Does it work on TVs and projectors?** Yes. EasyTimer.app scales to any screen size. For TVs and projectors, open a browser, navigate to EasyTimer.app, and press F for fullscreen. **Can I customise the fullscreen display?** Yes. Open settings to change duration, font, colour, background, size, position, sound, and custom text. The URL stores those settings so you can bookmark or share the exact fullscreen setup for a classroom, event, workout, rehearsal, or stream scene. **Does fullscreen mode work on phones and tablets?** Yes. Mobile browsers handle fullscreen differently, but the timer still expands to use the available screen. For the cleanest iPhone display, add the page to your Home Screen from Safari and launch it like an app. **Can I use fullscreen mode with OBS?** Yes. For streams, you can either capture the fullscreen browser window or use the OBS-specific browser source setup. The OBS timer and OBS setup guide are linked below for that workflow. **Will the timer keep running if I leave fullscreen?** Yes. Fullscreen changes only the display mode. The countdown continues in the browser when you exit fullscreen, switch tabs, or copy the configured URL. **Is this different from the classroom or presentation timer?** The fullscreen timer is the general large-display route. The classroom timer adds teacher-oriented copy and classroom durations, while the presentation timer is tuned for speakers, talks, and event timing. ## HIIT Timer - Free Online 40/20 Interval Workout Timer | EasyTimer.app Canonical URL: https://easytimer.app/hiit-timer This HIIT timer runs a configurable high-intensity interval workout, opening with a 40-second work and 20-second rest preset. The page opens ready to run a popular general-HIIT round: 40 seconds of hard work, 20 seconds of rest, repeated for 8 rounds — 8 minutes of intervals with a short prepare countdown before round 1. HIIT is the broad family of workouts that alternate near-maximal effort with short recovery; unlike Tabata (a specific 20/10x8 protocol), HIIT has no single fixed format, so the 40/20 round is a starting point, not a rule. The longer 40-second work window fits compound movements — burpees, kettlebell swings, rowing, sprints, circuits — that are hard to pace inside a 20-second Tabata interval. The timer counts each phase down with a full-screen color fill (orange draining for work, green filling for rest), plays audio cues on every phase change, and advances automatically so you never touch your phone mid-set. ### Use cases - General HIIT sessions - run the 40/20 round for bodyweight circuits, dumbbell complexes, kettlebell swings, or cardio machine sprints. - EMOM-adjacent and bootcamp-style classes - project the timer on a screen and run the whole room off one shared work/rest countdown. - Beginner-friendly intervals - if 2:1 work:rest is too aggressive, open the interval timer and flip the ratio (for example 30 seconds work, 60 seconds rest) while you build capacity. - Advanced conditioning - shorten the rest or add rounds on the interval timer once 40/20x8 stops being challenging. - Sprint and hill repeats - use the audio cues to start and stop efforts outdoors without watching the screen. - Home workouts without equipment - squats, push-ups, mountain climbers, and planks slot cleanly into 40-second work windows. ### How it works 1. **Start the 40/20 preset.** The page opens with 40 seconds of work, 20 seconds of rest, and eight rounds, plus a short prepare countdown. Review the round timeline before beginning. 2. **Follow each interval.** Start the session and use the color fill, phase cues, and timeline to follow work and recovery. The sequence advances automatically; use the configurable interval timer for a different work/rest format. ### Frequently asked questions **What is HIIT?** HIIT (high-intensity interval training) alternates short bursts of near-maximal effort with short recovery periods. Sessions are typically 4 to 30 minutes of intervals. The structure — work hard, rest briefly, repeat — is what defines HIIT; the exact durations vary by protocol and fitness level. **What is the difference between HIIT and Tabata?** Tabata is one specific HIIT protocol: exactly 20 seconds of all-out work, 10 seconds of rest, 8 rounds (4 minutes), from Dr. Izumi Tabata's research. HIIT is the umbrella term covering Tabata and every other work/rest format — 40/20, 30/30, 45/15, 60/60, and more. Use the Tabata timer for the strict 20/10x8 protocol and this page for the broader 40/20 default. **Why 40 seconds work / 20 seconds rest?** The 40/20 round is a popular general-HIIT format in group classes and interval apps. The 40-second window is long enough for compound movements like burpees, swings, and rowing to accumulate meaningful work, while the 2:1 work:rest ratio keeps intensity high. Eight rounds gives an 8-minute block you can repeat 2-3 times with a longer break between blocks. **What work:rest ratio should I use for my fitness level?** A practical progression: beginners start near 1:2 (for example 30 seconds work, 60 seconds rest) so effort quality stays high; intermediate exercisers use 1:1 (30/30 or 45/45); advanced athletes push toward 2:1 or 3:1 (40/20, 45/15). All of these are configurable on the interval timer page — this page keeps the 40/20 default fixed so it is always one tap from starting. **How do I change the work, rest, or round settings?** This page is pre-configured to 40/20x8 so it starts instantly. For any other protocol, open the interval timer at https://easytimer.app/interval-timer - it accepts custom work, rest, round, and prepare values (also via URL parameters such as ?work=45&rest=15&rounds=6) and includes named presets from beginner to advanced. **How long should a HIIT workout be?** The default here is 8 minutes of intervals (8 x 40/20). Most complete HIIT sessions run 15-30 minutes including warm-up and rest between blocks. Because intensity is the point, longer is not automatically better — two or three quality 8-minute blocks with 1-2 minutes between them is a solid session. **What do the colors and sounds mean?** Work phases drain an orange fill across the screen; rest phases fill green. A high chime marks the start of work, a lower chime marks rest, a tick counts down the prepare phase, and a double chime plays when the session completes — so you can train with the phone propped up across the room. **Does the HIIT timer work offline and on mobile?** Once the page loads, the timer runs entirely in your browser with no server calls, so it keeps working if the gym network drops. The layout works in portrait and landscape, and the full-screen color fill stays readable from the floor mid-set. ## Interval Timer — Free Online Work/Rest Timer | EasyTimer.app Canonical URL: https://easytimer.app/interval-timer This interval timer runs alternating work and rest periods for people timing workouts, circuits, or other repeated activities. Set your work duration, rest duration, and number of rounds, then start. The timer counts down each phase with a full-screen color fill - orange draining for work, green filling for rest - so you can see at a glance where you are in the session without squinting at digits. The prepare countdown gives you three seconds to get set before the first round begins, then the workout advances automatically from phase to phase with no taps. ### Use cases - HIIT workouts - set work and rest durations that match your training protocol and run multiple rounds without watching a stopwatch. - Circuit training - use the interval timer to keep transitions sharp between exercises in a timed circuit. - Tabata-style training - the Tabata preset (20s work / 10s rest / 8 rounds) is pre-configured at the dedicated Tabata timer page. - Mobility and stretching routines - alternate between active stretching holds and short rest periods. - Sports drills - time on-court, on-field, or in-gym repetition drills that require equal work and rest. - Study and productivity sessions - use short work-rest intervals for focused study blocks with scheduled breaks. ### How it works 1. **Choose work and rest intervals.** Set the work duration, rest duration, number of rounds, and prepare countdown for the session. Choose a named preset or enter values that match the planned workout. 2. **Follow the phases.** Start the interval session and use the color fill and round timeline to track work and recovery. The timer advances through phases automatically and uses cues when each phase changes. ### Frequently asked questions **What is an interval timer?** An interval timer alternates between a work phase (active effort) and a rest phase (recovery) for a set number of rounds. It is the standard timing tool for HIIT, Tabata, circuit training, and other interval-based training protocols. **How do I set custom work and rest durations?** Use the URL parameters: add ?work=45&rest=15&rounds=6 to the address bar to set 45-second work intervals, 15-second rest intervals, and 6 rounds. Any value you set is applied when the page loads. **Does the interval timer auto-advance between phases?** Yes. When the work countdown reaches zero the timer immediately starts the rest countdown, and vice versa. You do not need to tap anything between phases - the session runs end-to-end until the final round. **What is the prepare countdown?** The 3-second prepare phase gives you time to get into position before round 1 begins. During prepare the screen shows "GET READY" with a countdown and a preview of the first work duration. **Can I skip a phase early?** Yes. Press N on your keyboard or tap the skip button in the controls to advance immediately to the next phase. **Are there Tabata or HIIT presets?** Yes. The dedicated Tabata timer at https://easytimer.app/tabata-timer is pre-configured with Tabata protocol values (20 seconds work, 10 seconds rest, 8 rounds), and the HIIT timer at https://easytimer.app/hiit-timer opens with the common 40/20 HIIT round (40 seconds work, 20 seconds rest, 8 rounds). **Can I pause and resume mid-session?** Yes. Press Space or tap the pause button to pause at any point. Press Space again or tap play to resume from where you stopped. **Does the interval timer work on mobile?** Yes. The timer is designed for portrait and landscape use on phones and tablets. The full-screen color fill is visible without looking closely at the digits, so it works well when your phone is on the floor or propped up during a workout. ## Meeting Timer — Agenda Timer, Decisions & Recap | EasyTimer.app Canonical URL: https://easytimer.app/meeting The EasyTimer meeting timer helps facilitators plan an agenda, guide a live meeting one segment at a time, and leave with a written recap. Add agenda items with assigned durations, then start the meeting when the group is ready. During the meeting, the live view shows the current item and timing drift; after the meeting, review captured notes, decisions, and actions in a report. Use it for team check-ins, workshops, planning sessions, retrospectives, interviews, or any meeting where a visible agenda and record of outcomes are useful. ### Use cases - Team check-ins — give each update a planned slot, keep the agenda visible, and record follow-up actions while the discussion is fresh. - Planning and decision meetings — organize topics in advance, capture decisions alongside the relevant agenda item, and carry actions into the recap. - Workshops and facilitated sessions — make the next segment and its time allocation visible so the group can move through exercises and discussion deliberately. - Retrospectives — set time for each discussion area, note observations and decisions, and export a recap for people who need the outcomes afterward. - Interviews and review conversations — keep a structured sequence of topics on screen and leave room to capture notes during the conversation. - Remote or hybrid meetings — use a presenter view for facilitation and a separate audience link when attendees need a read-only view of the current agenda and timer. ### How it works 1. **Build the agenda.** Add agenda items, give each item a duration, and arrange them in the order the meeting will follow. Add notes or facilitation cues to an item when the person leading the discussion needs a reminder. The planned durations create the schedule that the live meeting can compare against. 2. **Start and guide the meeting.** Start the live meeting when participants are ready. The current agenda item and its countdown stay visible as you move through the plan. Pause when the discussion needs to stop, advance to the next item when the group is ready, or skip an item that no longer belongs in the meeting. 3. **Adjust timing and capture outcomes.** If a discussion runs over, the default behavior keeps later item durations and pushes the schedule end later. When you choose to extend an overrun item with absorb behavior selected, eligible later items may be shortened, up to their available capacity, to offset that extension. The meeting view tracks drift against the plan. Capture notes, decisions, and action items against the relevant agenda item so the record retains its context. 4. **Review and share the recap.** When the meeting ends, open the report to review agenda timing and the notes, decisions, and actions recorded during the session. Use the recap actions to copy or export the meeting summary in Markdown. The report gives attendees a record of what was discussed and what needs follow-up. ### Frequently asked questions **How does the meeting timer work?** Create an agenda with a duration for each item, then start the live meeting. The timer follows the current item, shows timing drift against the planned schedule, and lets the facilitator pause, advance, skip, or adjust the active item. A report is available after the meeting. **Can I change the agenda while a meeting is live?** Yes. The live meeting supports editing agenda items, and the facilitator can move through the agenda as the discussion changes. You can skip an item or adjust the active item’s duration instead of ending the session and starting over. **What happens when a meeting runs over its agenda?** The live view shows drift between the planned agenda and elapsed meeting time. By default, later item durations stay the same and the schedule end moves later. If you choose to extend an overrun item with absorb behavior selected, eligible later items may be shortened up to their available capacity to offset the extension. **Can I record decisions and action items?** Yes. Meeting notes, decisions, and action items can be captured with agenda items. Keeping them attached to the relevant part of the agenda makes the post-meeting report useful for follow-up. **Can I share the agenda with attendees?** The meeting provides a read-only audience view that can be opened from a separate meeting link. Attendees can follow the current agenda and timer without using the facilitator’s controls. **Can I export a meeting recap?** Yes. After the meeting, review the report and use its recap actions to copy or export the meeting summary as Markdown. The report includes the meeting record captured in the agenda, including notes, decisions, and actions. **Does the meeting timer need an account?** No account is required to plan and run a meeting with EasyTimer.app. Open the route in a browser, prepare the agenda, and start the session when the group is ready. ## OBS Timer — Free Overlay for OBS Browser Source | EasyTimer.app Canonical URL: https://easytimer.app/obs-timer This OBS timer is a ready-to-use browser-source countdown for streamers who want a timer overlay in a scene. It opens with stream-friendly defaults — a dark 10-minute preset, centered timer text, and a reusable URL — then lets you adjust duration, label, colour, transparency, sound, and display settings for your scene. Use this page when you want the ready-made OBS timer URL itself. Use the OBS setup guide when you need step-by-step Browser Source instructions, transparent CSS, source dimensions, or reset troubleshooting. It is useful for BRB screens, starting-soon scenes, intermission breaks, raid countdowns, and live challenge windows where the URL should stay stable in OBS while the timer settings remain editable in the browser. For step-by-step OBS browser source setup instructions, custom CSS, source dimensions, and scene-switch reset troubleshooting, our OBS setup guide explains the full workflow. ### Use cases - On-screen countdowns for stream segments, intermissions, sponsored reads, and planned breaks. - Game round timers visible to viewers, casters, and co-hosts without adding another desktop app to the capture stack. - BRB and "Starting soon" countdowns where the timer should sit over a designed scene without a solid background box. - Sub-goal, raid, charity, and live challenge timers that need a stable browser-source URL you can reuse between streams. - OBS scenes that need a stable browser-source URL, readable labels, and normal timer settings you can tune for the layout. - Streamer production checklists where the timer URL is saved once in OBS and updated by changing URL parameters later. ### How it works 1. **Prepare the overlay.** The page opens with its OBS-oriented 10-minute timer defaults. Use settings to change duration, label, font, colour, sound, or transparency for the scene. 2. **Add the URL to a scene.** Copy the configured page URL and add it as an OBS Browser Source. Check the source in the scene, then adjust its dimensions and placement in OBS to fit the overlay layout. ### Frequently asked questions **What is different about the OBS Timer overlay?** The OBS Timer starts from the same timer engine with route defaults for a 10-minute duration, dark theme, centered position, and an "OBS Timer" label. Transparency, sizing, and sound remain normal settings you can choose for your stream layout. **Should I use /obs-timer or the OBS setup guide?** Use /obs-timer when you want a ready-made OBS countdown overlay. Use /obs when you need step-by-step browser-source setup, transparent-background CSS, source dimensions, or scene-switch reset troubleshooting. **How do I change the duration or use the 10-minute preset?** The page opens at the 10-minute preset. To set a different countdown length, open settings and enter your own minutes and seconds — the new duration is applied immediately and saved into the URL so the same length reloads next time. **Can I change the on-screen look of the overlay?** Yes. Open settings to change the label text, pick from the available fonts, set the text colour, and adjust the size so the overlay matches your scene. Each change updates the live timer and is captured in the shareable URL. **Can I save this as a reusable OBS scene source?** Yes. Paste the URL into your OBS Browser Source once — every setting (duration, label, font, colour) is encoded in the URL, so the same link reloads your exact overlay next stream. If you change settings later, copy the updated URL back into that source. You can also bookmark the URL to reuse it across scenes, projects, or other streaming tools. **Does the countdown keep running if I switch OBS scenes or browser tabs?** While the OBS scene holding the timer is active, the browser source runs like a normal page and the countdown advances normally. If you switch to a scene where the source is hidden, OBS can throttle its timers the same way a background browser tab does — leave "Shutdown source when not visible" unchecked (and avoid "Refresh browser when scene becomes active" if you do not want a reset) so it keeps time across scene switches. In a regular browser, a backgrounded tab can have its tick throttled or paused, but the timer is anchored to the clock, so when you return to the tab the display rapidly catches up to the correct remaining time. **Can I use the OBS Timer without OBS — on a second screen or in a browser tab?** Yes. The OBS Timer is a normal web page that happens to ship with stream-friendly defaults, so you can open it fullscreen on a second monitor, a confidence screen, or any browser tab without OBS at all. OBS is only needed when you want the countdown composited into a scene as a browser source. ## Pomodoro Timer — Free 25/5 Focus and Break Timer | EasyTimer.app Canonical URL: https://easytimer.app/pomodoro This Pomodoro timer runs focus and break sessions for people structuring study, writing, or work into timed intervals. The default rhythm is the classic 25 minutes of focused work followed by a 5-minute short break, with a longer 15-minute break after several focus sessions. Every duration is customisable, so you can keep the familiar 25/5 pattern, shorten breaks for quick admin work, or stretch focus sessions for deep work. The timer clearly labels focus, short break, and long break phases, advances automatically, and keeps the display clean enough for fullscreen desks, classrooms, and OBS focus streams. The Pomodoro Technique was developed by Francesco Cirillo in the late 1980s; EasyTimer keeps the method practical in a browser without accounts, ads, or tracking prompts. ### Use cases - Focused deep work using the Pomodoro Technique, with automatic transitions from focus time to short breaks and long breaks. - Student study sessions where 25-minute blocks make revision, reading, flashcards, and practice problems easier to start and stop. - Writing and creative work sprints where the countdown creates a clear boundary without turning the tool into a task manager. - Productivity streams on Twitch and YouTube, using transparent background mode so viewers can see whether you are focusing or on break. - Remote-team co-working blocks, standup preparation, backlog triage, and other short group sessions where breaks should happen on schedule. - Presentation or classroom focus periods where the timer needs to be readable on a projector, shared screen, or secondary monitor. ### How it works 1. **Set up a focus cycle.** Open Pomodoro Settings to choose focus, short-break, and long-break durations and the number of focus sessions between long breaks. The page starts with its default focus and break cycle. 2. **Start and follow the phases.** Start the timer and use the visible phase label to distinguish focus, short break, and long break. The timer advances between phases automatically; adjust sound and display preferences in settings. ### Frequently asked questions **What is the Pomodoro Technique?** The Pomodoro Technique is a time-management method developed by Francesco Cirillo: work for 25 minutes ("one pomodoro"), take a 5-minute break, repeat 4 times, then take a longer 15–30 minute break. The short focused intervals reduce mental fatigue while the regular breaks restore attention. **How long is a Pomodoro session?** A standard Pomodoro is 25 minutes of work followed by a 5-minute break. After four Pomodoros, take a 15–30 minute long break. EasyTimer.app ships these defaults out of the box and lets you customise every duration in settings. **Can I change the focus and break durations?** Yes. Open settings to customise focus duration, short break, long break, and the long-break interval (how many focus sessions before the long break). Your settings are saved automatically in the URL — bookmark the page to keep them. **Should I use 25/5 or a different Pomodoro length?** Use 25/5 when you want the familiar Pomodoro rhythm and a low-friction start. If the task needs deeper context, try a 50-minute or 1-hour focus block with a longer break. If the task is small or you are tired, a 15-minute focus block can be easier to begin. **Is there a sound when the timer ends?** Yes, a chime plays at the end of each focus session and break. You can disable sounds in settings. **Can I use this on OBS for a focus stream?** Yes. Enable transparent background in settings and paste the URL as an OBS browser source. The Pomodoro timer displays the current mode (focus / short break / long break) as an overlay. **Does the Pomodoro timer require an account or analytics consent?** No. EasyTimer.app does not require signup, ads, or tracking banners for the Pomodoro timer. Open the page, start the focus cycle, and keep working. **Can I bookmark my Pomodoro setup?** Yes. Duration, display, sound, colour, and text settings are encoded in the URL. After you adjust the timer, bookmark or share that URL to reopen the same Pomodoro setup later. ## Presentation Timer — Countdown for Speakers | EasyTimer.app Canonical URL: https://easytimer.app/presentation-timer This presentation timer gives speakers and event teams one visible countdown for a talk, pitch, Q&A slot, or break. This is the single visible countdown for one speaking slot — a talk, a pitch, a Q&A block, or a break — shown big on a second screen, projector, confidence monitor, or OBS browser source so the speaker can see exactly how much time remains for that one slot. The timer is intentionally simple: one large countdown, clear fullscreen mode, custom colours and text, and shareable URL settings that make it easy to reuse the same setup for the next talk, pitch, demo, or rehearsal. It works especially well when you need a no-signup timing display fast, without building a slide or installing event software. If a talk has multiple timed sections you want to pace one after another, the multi-section presentation flow timer is the better fit. ### Use cases - Conference and event speaker timing — place the countdown on a confidence monitor, side screen, or technician laptop so speakers can pace themselves. - TED-style talk countdowns — set a strict talk length and keep the display clean enough that it supports the speaker without distracting the room. - Classroom presentation timing — give students a visible countdown for speeches, debates, group presentations, and peer feedback rounds. - Virtual event and webinar timers — capture the timer in OBS, Streamlabs, Zoom screen share, or another production tool for remote audiences. - Product demos and sales pitches — show a discreet timer during rehearsals or live demos so Q&A, setup, and handoff time is protected. - A single panel or workshop segment — show one countdown for the current block on its own; if you need to chain opening remarks, exercises, breaks, and wrap-up into one paced run of show, the presentation flow timer handles that. ### How it works 1. **Set one speaking slot.** Choose the duration for a talk, pitch, Q&A block, or break, then add a brief label if the speaker needs a cue. This route is for one visible countdown at a time. 2. **Place it where the speaker can see it.** Open the timer on a second display or use fullscreen on a confidence monitor. For a virtual event, configure transparency and use the page as a browser source in the production layout. ### Frequently asked questions **Can the presenter see the timer while presenting?** Yes. Open EasyTimer.app in a separate browser window or on a second monitor. Use fullscreen mode so the countdown is always visible while presenting. **Can the audience see the timer too?** Yes — project EasyTimer.app fullscreen on a shared screen, or embed it via OBS if you're running a virtual event on Zoom or Teams. **Can I set a warning when time is almost up?** EasyTimer.app flashes when the timer reaches zero. You can also use the custom text field to display a message such as "2 mins left", "Wrap up", or "Q&A next" so the speaker understands the cue at a glance. **Can I save one presentation countdown to reuse?** Yes. A single timer's settings are encoded in its URL, so after choosing the duration, font, colour, background, and custom text for one slot, bookmark that URL or paste it into your run sheet. Each saved link is one countdown; to save a whole multi-section run of show instead, use the presentation flow timer. **Does this work as an OBS overlay for virtual talks?** Yes. Enable transparent background, copy the URL, and paste it into OBS as a browser source. That makes the countdown usable in livestreams, webinars, and recorded presentations. **What is the difference between this and the sectioned presentation timer?** This page is best for one countdown: a talk, pitch, Q&A slot, or break. The sectioned presentation flow timer is better when a talk has multiple timed sections and you want a report afterwards. **Can I use this for meetings?** For a single meeting segment, yes. For agendas with multiple timed items, decisions, notes, facilitation cues, presenter handoffs, break timing, and a post-meeting report, use the meeting timer instead. ## Online Stopwatch — Free Browser Stopwatch | EasyTimer.app Canonical URL: https://easytimer.app/stopwatch This online stopwatch measures elapsed time and lap splits for coaches, presenters, teachers, and anyone timing an activity without a set finish time. Start from zero, pause and resume cleanly, record lap times, and reset for the next run. The stopwatch runs locally in your browser, keeps the first screen on the tool, and stays readable for classrooms, presentations, coaching, workshops, and simple desk timing without signup or ads. Use it when elapsed time matters more than a deadline: rehearsal sections, exercise rounds, classroom challenges, facilitation drills, QA sessions, or any task where you want a clean count-up display instead of a countdown. ### Use cases - Classroom activities where the group is measuring how long a task takes instead of counting down to a deadline. - Presentation rehearsals and practice talks where speakers need elapsed time plus lap markers for sections. - Coaching, workouts, drills, and informal challenges where lap times help compare rounds. - Workshops, facilitation exercises, and live demos where the timer should count up from the moment an activity starts. - Desk timing for calls, focus blocks, experiments, cooking prep, and other everyday tasks that need a clean stopwatch. - Shared-screen timing where the display needs to stay legible for remote viewers without exposing a dashboard or account. ### How it works 1. **Start elapsed-time tracking.** Open the stopwatch and press Start when the activity begins. Pause and resume if the activity stops; the count-up display is useful when the finish time is unknown. 2. **Mark and review laps.** Press Lap at each section or round to record a split. The latest lap appears first; press Reset when you are ready to clear the elapsed time and lap list for another run. ### Frequently asked questions **Is this stopwatch free?** Yes. EasyTimer.app's online stopwatch is free, runs in your browser, and does not require an account. **Does the stopwatch support lap times?** Yes. Press Lap while the stopwatch is running to record the current elapsed time. The latest lap appears first, with a split delta from the previous lap. **Can I pause and resume the stopwatch?** Yes. Pause freezes the elapsed time, Resume continues from the same value, and Reset clears both elapsed time and laps. **Is this accurate enough for scientific timing?** It uses a monotonic browser time source for practical timing, but it is not a certified scientific instrument. Use dedicated hardware for regulated or high-precision measurement. **Can I use the stopwatch fullscreen?** Yes. The display is designed for large screens and projected views. Browser fullscreen support depends on your device and browser. **Can I customize the stopwatch display?** Yes. The stopwatch uses the same visual settings system as the main timer, so you can adjust label text, color, font, size, position, and shareable URL settings for the room or screen. **Does the stopwatch keep timing if the tab is backgrounded?** The display is anchored to elapsed clock time. Browsers may throttle background tabs, but when you return the stopwatch catches up to the correct elapsed time instead of counting missed ticks one by one. **Is this the same as the OBS timer?** No. This page is a standalone count-up stopwatch. The OBS pages are countdown-focused browser-source tools and setup guides. ## Stream Timer — Twitch, YouTube & Kick Countdown | EasyTimer.app Canonical URL: https://easytimer.app/stream-timer This stream timer creates browser-source countdowns for live creators who need a reusable timer across streaming platforms. Use it as a Twitch timer, YouTube countdown, Kick stream countdown, Streamlabs timer, OBS browser source, XSplit source, or vMix overlay. Set the duration and label, copy the generated URL, and paste it into your streaming app for Starting Soon scenes, BRB breaks, intermissions, raids, giveaways, and live event windows. The route is intentionally broader than OBS: it works for Streamlabs Desktop, XSplit, vMix, Ecamm, browser-window capture, and other active production workflows that can display a webpage. Save separate links for recurring scenes. ### Use cases - "Starting soon" countdowns for Twitch, YouTube Live, Kick, and multi-platform simulcasts. - BRB and intermission timers that keep viewers oriented while you step away, change scenes, or reset equipment. - Charity stream goal countdowns, donation-drive windows, subathons, and limited-time community challenges. - Sub-train, raid, co-stream, giveaway, queue, and lobby timers where the browser URL needs to be easy to reuse. - Speedrun pacing references, tournament breaks, watch-party countdowns, and other live formats that need a visible clock. - Creator workflows outside OBS, including Streamlabs Desktop, XSplit, vMix, Ecamm, and simple screen-share layouts for live production. ### How it works 1. **Configure a stream countdown.** Choose a duration and on-screen label for the scene, such as Starting Soon or BRB. Adjust the display and transparency settings to suit the browser source or captured browser window. 2. **Reuse it in your streaming app.** Copy the configured URL and add it to a browser source in your streaming app. Save a separate link for recurring scenes so each countdown opens with its intended settings. ### Frequently asked questions **Can I use this as a Twitch timer?** Yes. Set the duration and text, then paste the copied browser-source URL into your Twitch streaming setup through OBS, Streamlabs Desktop, XSplit, vMix, or another tool that supports browser sources. **What platforms does the stream timer work with?** Any streaming platform that supports a browser source: Twitch, YouTube Live, Kick, Trovo, Facebook Gaming, Rumble. The timer is a webpage URL — paste it into the browser source of your streaming app and it appears on stream. **What is the difference between the Stream Timer and the OBS Timer?** The Stream Timer is platform-agnostic — its defaults work across Twitch, YouTube, Kick, etc. The OBS Timer (/obs-timer) is the same timer with OBS-specific defaults pre-applied. The OBS Setup page (/obs) is a step-by-step guide for adding either to an OBS browser source. **Does it work with Streamlabs Desktop, XSplit, or vMix?** Yes. Streamlabs Desktop, OBS Studio, XSplit, vMix, and any active tool with a browser-source feature works with EasyTimer.app. **Can I use a sub-goal countdown?** Yes. Set a future end time in settings, copy the URL, and the timer counts down to that exact moment. Useful for "Subgoal achieved in:" overlays. **Will the chime play on my stream audio?** The chime plays in the browser source if your streaming app captures browser-source audio. To prevent it bleeding into voice audio, either disable the chime in settings or mute the browser-source audio in your streaming app. **Can I make a Twitch starting-soon timer?** Yes. Set the countdown duration, add text such as "Starting Soon", choose a readable font and colour, then copy the URL into your streaming app. Save that URL with the scene so the same setup is ready next stream. **Should I use this page or the OBS setup page?** Use /stream-timer when you want a general live-stream countdown for Twitch, YouTube, Kick, Streamlabs Desktop, or another active browser-source-capable tool. Use /obs when you need detailed OBS Browser Source setup steps, and use /obs-timer when you want an OBS-oriented countdown preset. ## Tabata Timer - Free Online 20/10 Interval Timer | EasyTimer.app Canonical URL: https://easytimer.app/tabata-timer This Tabata timer runs the 20-second work, 10-second rest, eight-round protocol for people following a standard four-minute Tabata session. The protocol was developed by Dr. Izumi Tabata and colleagues and is a widely used high-intensity interval format. Open this page, press play, and the timer runs the full Tabata sequence with audio cues, a full-screen color fill, and a round-by-round timeline strip so you always know your position in the session. ### Use cases - Classic Tabata training - run the standard 20/10/8 protocol for any exercise: sprints, burpees, kettlebell swings, box jumps, or bodyweight movements. - Bodyweight HIIT - use Tabata timing for push-up, squat, plank, or mountain climber intervals without equipment. - Cardio conditioning - apply Tabata timing to jump rope, cycling, rowing, or any cyclical effort. - Group fitness classes - display the Tabata timer on a screen or projector and run the class off a single shared countdown. - Gym and CrossFit-style workouts - Tabata is a common timing format in functional fitness; load this page on your phone and prop it up. - Sport-specific intervals - apply Tabata timing to shuttle runs, agility drills, or sport-specific conditioning work. ### How it works 1. **Start the preset protocol.** The page opens with the 20-second work, 10-second rest, eight-round Tabata sequence. Review the round timeline and make sure the display is visible before you begin. 2. **Follow the work and rest cues.** Press Start and move through each interval as the timer advances. The color fill, audio cues, and round timeline show the current phase and progress through the four-minute sequence. ### Frequently asked questions **What is the Tabata protocol?** Tabata is a high-intensity interval training protocol developed by Dr. Izumi Tabata: 20 seconds of maximum-effort work followed by 10 seconds of rest, repeated for 8 rounds (4 minutes total). The original research showed significant improvements in both aerobic and anaerobic fitness. **How long is a full Tabata session?** One Tabata round is 4 minutes: 8 intervals of 20 seconds work and 10 seconds rest (8 x 30s = 240s). The 3-second prepare countdown brings the total page time to about 4 minutes 3 seconds. **Can I change the work and rest durations on this page?** The Tabata timer is pre-configured to the standard 20/10 protocol. For custom durations, use the interval timer page where you can set any work duration, rest duration, and number of rounds. **What are the audio cues?** A chime plays when the work phase starts (high tone), when the rest phase starts (lower tone), and twice when the full session is complete. A tick sounds during the 3-second prepare countdown. **Can I see which round I am on?** Yes. The "WORK - Round X/8" or "REST - Round X/8" label shows your current position. The timeline strip at the bottom of the screen shows all 16 blocks (8 work + 8 rest) with completed blocks dimmed and the current block highlighted. **Does this work without internet?** Once the page loads, the timer runs entirely in the browser with no server calls. Keep the tab open and it will continue to work even if your network drops mid-session. **Is Tabata the same as HIIT?** Tabata is one specific HIIT protocol: exactly 20 seconds of work, 10 seconds of rest, 8 rounds. HIIT is the broader family of high-intensity interval formats — 40/20, 30/30, 45/15, and longer rounds all count. If you want a general HIIT session with a longer work window, use the HIIT timer; this page stays fixed to the studied 20/10/8 format. **Is there a version with custom rounds or durations?** Yes. The interval timer at https://easytimer.app/interval-timer lets you set any work duration, rest duration, and round count via URL parameters.